Two lobe roots blowers is a new product developed by our company based on the advanced technology features of types of Roots air blower at domestic and abroad. The development of Air blower impeller functions is a three-leaf type, two impeller is based on the application of advanced CAD design and advanced processing technology, to ensure the fan performance, and our roots air blowers have been used widely in all kinds of industrial machines. Two lobe roots blowers have wide range of air flow, sub files, high pressure, and there are nearly 20 models, more than 100 kinds of specifications of three lobes roots air blowers.
JHBJHBJHB
Two lobe roots blowers is adopted for shielded wire of intake air and air exhausted of case of blower.Triangular air inlet constructed by bright wire at the top of rotor is opened in sequence through rotation of rotor,Air blower impeller functions is a three-leaf type, two impeller avoiding instantaneous opening or closing of air inlet and air exit,resulting in extremely small running noise,almost no air exhaust pulsating movement.
KJHHBCDV
High efficiency.Two lobe roots blowers is adopted for rotor,facilitating keeping mutual clearance between rotors,no need to consider slight axial change causing rotors mutually contact,just as rotor of spiral type,thus making efficiency further elevate.Low vibration.As precise digital control machine toolAir blower impeller functions is a three-leaf type, two impeller is adopted for machine of rotor,and adopting high precision dynamic balance is adopted to conduct balancing,therefore there is almost no vibration for running of blower.
Product Description
Air blower impeller functions is a three-leaf type, two impeller
Properties:
ZhanEr electric leaf blower provides substantially constant output rate, i.e. volume of airflow at inlet varies little when pressure increased or Air blower impeller functions is a three-leaf type, two impeller status changed, conveys oil-free air or gas, properties of which normal three-lobe blower possesses as well. However our roots blower owns unique advantage of adopting the most advanced structure of special shaped inlet/outlet port and internal leakback variation, which effectively attenuates leakback-induced noise, resulted in much lower pulsation and noise level.
MODEL |
AIR CAPACITY | PRESSURE |
WSR50 |
0.65m3/min-2.71m3/min | 14.7kPa-58.8kPa |
WSR65 |
0.94m3/min-3.72m3/min | 14.7kPa-58.8kPa |
WSR80 |
2.34m3/min-6.04m3/min | 14.7kPa-58.8kPa |
WSR100 | 3.25m3/min-10.13m3/min | 14.7kPa-58.8kPa |
WSR125 |
5.35m3/min-12.23m3/min | 14.7kPa-58.8kPa |
WSR150 | 10.37m3/min-26.94m3/min | 14.7kPa-58.8kPa |
WSR175 | 19.65m3/min-40.35m3/min | 14.7kPa-58.8kPa |
WSR200 | 27.65m3/min-58.81m3/min | 14.7kPa-58.8kPa |
WSR250 | 61.4m3/min-97.01m3/min | 14.7kPa-58.8kPa |
WSR300 | 87.1m3/min-137m3/min | 14.7kPa-58.8kPa |
WSR300A | 101.9m3/min-154.6m3/min | 14.7kPa- |
WSR350 | 106.7m3/min-186.6m3/min | 14.7kPa-58.8kPa |
Accessories
1. Inlet silencer (with air filter), discharge silence
2. check valve, pressure relief valve
3. flexible joint, anchor bolt
Working Principle:
ZhanEr roots blower (dry type roots Air blower impeller functions is a three-leaf type, two impeller pump), are positive displacement machines consisting of a pair of three-lobe rotors machined with high precision, rotating inside an oval shaped casing at the same speed, but in opposite direction.
One rotor is driven by external power while the other rotor is driven by synchronous gears. As the rotors rotate, air is drawn into inlet side and forced out the outlet side to achieve functions of air blowing and extracting.
compact and sturdy construction, light weight,
good pressure boost, high air volume, low noise,
continuous duty and maximum reliability, clean
output air, long lifespan and easy maintenance.
Simple construction, long lifespan, superior
durability and easy maintenance by adopting
special bearings;
Check valve, safety valve: QT450-10
Backflow can be reduced and controlled within the units
Shandong ZhanEr Machinery Co., Ltd., short as Shandong ZhanEr, located in Air blower impeller functions is a three-leaf type, two impeller City, Shandong Province, is a professional manufacturer of roots blower and rotary blower, owns combined capability of design, development, manufacture and sales. .
Shandong ZhanEr has strong technology research & development capabilities and quality monitor system and owns advanced NC processing equipment and testing instruments.
Since established, Shandong ZhanEr is growing so fast that its sales network has covered not only China but also more than 60 countries over the world.
Taking environmental protection as the foundation, Shandong ZhanEr is committed to improving compressor blower & fan technology in China, upgrading to enhance the comprehensive performance of blowers, and exerting itself to develop high quality equipment of environmental protection for industries like wastewater treatment, aquaculture and dust pneumatic conveying etc.
Certifications Packing & DeliveryOur most professional packaging
Transport of large trucks to the seaport
And international transport cooperation
Packaging Details
The normal package is fumigation-free wooden
case or according to customers special request.
Our Service
Corresponding after-sales service networks being set up, helps meet customer’s needs in the max extent in
terms of product quality and after-sales service.
Q1. What is your terms of packing?
A: Generally, we pack our goods in fumigation-free wooden case. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 7 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery