Brand |
Mingfeng |
Model |
MFSR-100H |
Item |
Roots blower |
Type |
MFSR series three lobes |
Flow rate |
4.10m3/min - 8.62m3/min |
Pressure |
63.7kpa -98kpa |
Motor power |
11kw -22kw |
|
|
Frequency |
50HZ, 60HZ |
Voltage |
220V—525V |
Bore |
100mm |
Dimension |
|
Drive type |
Direct coupling or belt transmission |
Cooling type |
water-cooling |
Weight |
460kg |
Package dimension |
|
|
Features: 1 positive displacement blower, no compression, air conveying is smooth, there is small flow rate changes along with pressure changes. 2 tri-lobe linear-shaped impeller making inlet and outlet pulsation quiet with low noise and vibration. 3 special impeller of mesh curve and small enclosure making roots blower high efficiency, low energy consumption. 4 small size, light weight and elegant appearance. 5 with high-precision synchronous hard-toothed surface gears ensure long life. 6 much cleaner with no oil 7 with nitrile rubber seal rings 8 Swedn SKF brearings 9 Germany OPTI belts | |||
|
Main Application: Sewagewater treatment, Aquaculture; Pneumatic Conveying; Pressurization system; Recirculation System; Cement and food supply; Biogas firing system; Desulphurization and ash removal in power plants; Sewage disposal; Tap water; Mining and metallurgy; Other fields; | |||
|
Standard Accessories: Main Blower Electric motor Suction Silencer Discharge Silencer Belt, Gear Oil Anti-vibration pad Belt Guard Flexible Connector Pulley Check Valve Foundation Bolts Suction air filter, Common Base for blower and motor Pressure Relief Valve Pressure Guage | |||
Delivery time: within two weeks | |||
i, High-pressure Roots Blower Low noise
oxidation air blower with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.
JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, oxidation air blower the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.
HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicaloxidation air blower under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.