MRT-65 three lobes roots blower pumps for wastewater treatment
Features
- Stable air flow and fewer pressure variations
- Clean air; with no oil dirty particles
- Construction is simple and easy to maintain
- Bearings and gears are lubricated with oil on end side of the blower
- All of product can be used for OEM
- Proven design, backed by a 1-year warranty
Adnentage
Wider range for volume,pressure and horse power.
- Bore 40mm to 400mm(1.5” to 16”)
- Pressure:1000 to 8000 mmAq (Air cooled)
- 8000 to 10000 mmAq (Water cooled and the type model is LT-#W)
- Horse power:0.5 to 700 Hp
- Capacity:0.5 to 360 m3 /min
Why select Three Lobes Roots Blower
LOWER ENERGY CONSUMPTION
Three lobes’ design control backflow pressure to rotor so reduce energy consumption.
LOWER NOISE
Pressure pluses are the major noise source of blower.
Three lobes’ design can efficiently reduce noise by approximately 5dB.
MRT-065 three lobes roots blower pumps for wastewater treatment BEARING LIFE
Less vibration transmitted through the lobe results approximately 20% MRT-065 three lobes roots blower pumps for wastewater treatment bearing life.
Conventional blowers result pressure pluses and vibration rob power and shorten the life of every bearing, gear and other drive train components.
Structure
| No. | NAME | MATERIAL | No. | NAME | MATERIAL |
| 1 | Gear case | FC250 | 11 | Seal case | FC250 |
| 2 | Oil splash | SS400 | 12 | Pulley | FC250 |
| 3 | Oil plug | S45C | 13 | Nut | SS400 |
| 4 | Bearing | SUJ2 | 14 | Seal | NBR |
| 5 | Bearing Case | FC250 | 15 | Nut | SS400 |
| 6 | Labyrinth seal | SS400 | 16 | Shaft | SCM440 |
| 7 | Eye bolt | S45C | 17 | Main casing | FC250 |
| 8 | Rotor | FC250 | 18 | Timing gear | SCM415 |
| 9 | Side cover | FC250 | 19 | Oil drain | S45C |
| 10 | Oil case | FC250 | 20 | Oil gauge | S45C |
Performance Table
Warranty
|
We offer one year warranty for our roots blowers.
|
Production & Packing
Trade Information
Trade terms:
EX-work,CIF,CNF,Door To Door
Payment:
- T/T,L/C at sight
- Paypal
- Western Union
- Credit Card
Delivery Date:
About 7-14 days after receiving your payment or L/C at sight (Standard Specification)
Shipping:
By sea, By air,Express delivery
Company Information
CE / UL / SGS / D&B Certified and Patent
FAQ
| Q: What is your MOQ quantites ? |
|
A: We have no MOQ limited for our standard specification products. We always prepare enough stocks to reduce the stock cost for our clients.
|
| Q : What is your delivery date ? |
|
A : Normally we will ship you our standard specifications goods about 7-14 days after receiving your payment. It depends on the quantities you order.
|
Q : How can I get a quotation? |
|
A :Leave us massage with your purchase requements and we will reply you on working time. And you can aslo contact us by phone or e-mail.
|
|
Q :Can I order one piece for sample to test the quality? A: Yes, We recommend to check the sample before order. |
*The information provided here is for reference only
=CONTACT US=
i, High-pressure Roots Blower Low noise
MRT-065 three lobes roots blower pumps for wastewater treatment with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.
JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, MRT-065 three lobes roots blower pumps for wastewater treatment the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.
HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicalMRT-065 three lobes roots blower pumps for wastewater treatment under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.