swage treatment roots blower
swage treatment roots blower features:
Low noise.
Spiral cutin mode is adopted for shielded wire of intake air and air exhausted of case of blower.Triangular air inlet constructed by bright wire at the top of rotor is opened in sequence through rotation of rotor,avoiding instantaneous opening or closing of air inlet and air exit,resulting in extremely small running noise,almost no air exhaust pulsating movement.
High efficiency.Three lobes linear type is adopted for rotor,facilitating keeping mutual clearance between rotors,no need to consider slight axial change causing rotors mutually contact,just as rotor of spiral type,thus making efficiency further elevate.
Low vibration.As precise digital control machine tool is adopted for machine of rotor,and adopting high precision dynamic balance is adopted to conduct balancing,therefore there is almost no vibration for running of blower.
Long service life.High precision driving gear is adopted,which not only makes service life be swage treatment roots blower SR80,but also lower noise.
High quality.Components imported from Japan are adopted for all bearing and triangular belt,making product quality more reliable.
Non-pollution.Output clean air.Characteristic seal structure is adopted for lubricated locations of each transmission componet.
More sepcification of swage treatment roots blower :
| Full name | SHANDONG BAIMAI Brand three lobes roots blower BMSR-80 |
| Capacity | from 2.34 to 5.43 m³/min |
| power | from 2.2kw to 11 kw |
| pressure | from 9.8 to 58.8KPa |
| unit Max weight | 277KG |
| bering brand | NSK |
| Belt brand | optibelt |
| gear brand | zhuzhou gear |
| rotary speed | 990--1480 |
We'll give you a competitive price with high quality for our first cooperation.Any query,feel free to ask me.
swage treatment roots blower SR80 YU
shandong baimai roots blower CO.,LTD
86-15753131966/15610101380
swage treatment roots blower SR801921099745
swage treatment roots blower SR801512591080
i, High-pressure Roots Blower Low noise
swage treatment roots blower SR80 with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.
JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, swage treatment roots blower SR80 the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.
HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicalswage treatment roots blower SR80 under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.