Industrial Air static antistatic SL-028 blower static eliminator esd fan
Product Description
SL-028 Anti static Desktop Ionizing Air Blower is a wide area ESD Ionizer designed to provide total coverage of an area of approximately 24" x 48" and is used to control the accumulation of static electricity on electrically insulative surfaces and objects. The unit is equipped with an on demand heater used to reduce thermal shock syndrome prevalent with the manufacturing of certain items.
Detailed Images
Features
1. Rapidly neutralizes static charges.
2. Covers an extended distance with ionized air.
3. Variable speed fan with wide range of air flow.
4. Inherently balanced ion output.
5. Patented ion emitter cleaner.
6. Ionization indicator lamp.
7. Ion wattage heater for operator comfort.
8. Overhead installation to save more space.
9. Durable, electrically grounded metal enclosure.
Technical ParameterOperating Voltage |
110V/60Hz / 220V/50Hz |
Current Consumption |
Max. 3.20 Amp (high fan and heater). Min. 1.60Amp (low fan and low heat). |
Operating Temperature |
0 ~50°c |
Air Coverage |
24" x 48" (60cm x 120cm) |
Air Volume |
70~120 CFM |
Size |
(460 mm x 285 mm x 155 mm) |
Ion Balance |
0v 10v |
Weight |
7.8 kg |
Test Result
Distance |
Left 300 mm |
Center Line |
Right 300 mm |
300 mm |
1.3 sec |
1.1 sec |
1.2 sec |
600 mm |
2.5 sec |
2.2 sec |
2.3 sec |
900 mm |
3.9 sec |
3.6 sec |
3.8 sec |
1200 mm |
6.6 sec |
6.5 sec |
6.3 sec |
1. Distance measured in mm, decay time measured in seconds.
2. Test data available using ME 268A charge plate analyzer.
3. Test figures are subject to the variation in the atmospheric conditions
4.Discharge times are in seconds from 1000 volts to 100 volts.
Attentions:
Do not insert objects through intake or outlet grille.
Do not operate unit inflammable or explosive atmospheres.
Internal repairs or servicing should be done by PC personnel.
The ionizing air blower must be grounded for safe operation. Plug the unit into a standard 3- terminal grounded receptacle. If an extension cord is necessary, use only a 3- wire extension cord that provides grounding.
Contacts
**********************************************************
E-STAR GROUP TECHNOLOGY CO., LIMITED
ADD: 5 Wei Industrial Park,Zhujin Industrial Area,LongHu District,
Shantou City,Guangdong,CN
TEL: 86-754-88811959 Whatsapp: +86 18675427494
Industrial Air static antistatic SL-028 blower static eliminator esd fan moboba02 Skype: esgroup68
E-mail: esgroup68@126.com www.es-group.com.cn
**********************************************************
i, High-pressure Roots Blower Low noise
Industrial Air static antistatic SL-028 blower static eliminator esd fan with adoption of helical tri-lobe roots rotors and the discharge port of special geometry, the airflow noise is much lower compared to typical straight-lobe roots blower. The noise level can be reduced by 8db in the band of low frequency; hence the noise in the surroundings of blower can be significantly improved.
JHJHBJH
ii, High adiabatic efficiency
High-pressure Roots Blower with design of helical tri-lobe roots rotors, Industrial Air static antistatic SL-028 blower static eliminator esd fan the airflow pulsation is less and the air streamline would be more stable. Therefore the fluctuation in airflow is less and then the energy waste can be reduced. Additionally, the instantaneous backflow of discharge is lower by the design of special discharge port. Compared to straight-lobe roots blower, the adiabatic efficiency can be raised up to 20%.
HJJHBJH
iii, High-pressure Roots Blower Super Energy saving
Compared to the typicalIndustrial Air static antistatic SL-028 blower static eliminator esd fan under the same operation conditions of discharge pressure and airflow volume, the power consumption of helical tri-lobe roots blower will be lower by 20.