High Quality 1500W roots blower
Feature :
1.Impeller JQT series gas ring High Quality 1500W roots blower pump installed on the motor rotor directly and no touch compression completely.
2.As the bearing is installed in the compression chamber outside,It can ensure the machines Max. working possibility under the Max. different pressure.
Configuration:
Model Number |
JQT-1500-C |
Structure |
Single stage |
Type |
Air blower |
Pressure |
High pressure |
Power Source |
Electric Blower |
Rated Voltage |
220V/380V/50Hz/60Hz |
Rated Power |
1.5kw |
Max pressure |
25kpa |
Max High Quality 1500W roots blower |
-18kpa |
Maximum flow |
210m3/h |
Weight |
25kg |
Outline dimensions |
345*360*371mm |
Insulation Class |
F |
Certification |
CE |
Material |
Die cast aluminum |
Application |
widely used in metallurgical, chemical, food, electronic coating, etc |
Working principle:
Inlet 1 suck gas firstly,then it goes into side channel 2,the impeller will give gas a speed in the direction of rotation.The centrifugal force of the blade make the gas acceleration and pressure increased.Gas pressure to further increased because of revolving and gas kinetic energy increased.
At last,side channel is becoming nHigh Quality 1500W roots blower at the exit,the gas is squeezed out pressure chamber and exit.
Detailed Photo:
Applications
JQT High Quality 1500W roots blower pump is widely used in a wide range of pressure there were large pumping speed of ejector gas containing dust and water vapor is not sensitive to the widely used in metallurgical, chemical, food, electronic coating, etc
Product display
Exhibition Show
Certification
Factory
Before You Start
1.Should take measures to minimize the loss of the pipeline in order to reduce the loss of pressure and flow.
2.Should use the occasion to correctly estimate the pressure and flow of the work place, in order to select the appropriate type of air pump and piping.
Precautions
Use Note power supply voltage is adapted.Boot and run for 10 minutes before using the gas source.
3.Normal working power floating shall not exceed ten percent of the rated voltage.
4.Pump should be placed above the horizontal ventilated and dry place.
5 non-hazardous liquids into the pump body.
6.The air pump not have a corrosive, explosive materials used near.Air pump using ambient temperature -10 ~ 40 altitude higher than 1000 m parameters will change.
7.Users should professionals device protection switch and ground.User maintenance, overhaul air pump should be cut off the power.
welcome to contact me
In the field of large diameter roots blower, High Quality 1500W roots blower is a new type of high efficiency energy-saving unit. This series of Rotary roots blower has many years of aerodynamic research results, using three-dimensional simulation technology, High Quality 1500W roots blower to develop a new type of impeller line. Although the new line impeller processing is complex, but high efficiency, low noise. In the high pressure and special gas transmission, the unit is in the leading position in the world.
HBJHFSF
This series of Rotary roots blower with various specifications, there are positive pressure, negative pressure, dry and wet, single-stage, double stage (see TN P101). High Quality 1500W roots blower And according to the different transmission media, a variety of forms: labyrinth seal, expansion ring type, filler type, mechanical seal etc..
SDFVD
This series of Rotary roots blower unit is widely used in electric power, petroleum, chemical, fertilizer, steel, smelting, cement, oxygen, food, textile, papermaking, dust cleaning, aquaculture, sewage treatment, pneumatic conveying and other departments of industry.