high quality impeller aerator for the fishery/aerators for aquaculture
skype : shuliy0228 Whatsapp/viber/mob/wechat 0086-15838061759
Specification for impeller aerator/impeller aerator
Through deep investigation of feedback information concerning impeller
aerator quality, we have developed an impeller aerator that is designed to
avoid engine burn out and gear damage.
Features:
1) Built-in protector will jump off automatically so as not to burn down the
engine if the lack phase of tri-phase source or engine overheating occurs
2) The gear is made using chromium-manganese-titanium alloy steel
immersed in carbon and nitrogen, which can prolong the life span
3) Using a patented technique, the non-welded impeller can run stably, and
is easy to carry around
4) To ensure permanent application under strongly corrosive conditions
(seawater or industrial sewage) without replacing the impeller or painting,
we have developed engineering plastic impellers and stainless steel
impellers according to different environments and customers' special
Features :
The gearwheel in the reducer is made of nice compound metal, which can extend the reducers
life.
1.High efficiency and saving over 20% electric energy than traditional models.
2.Mechanical seal is available to against oil leak pollution.
3.Built-in protector is available to avoid motor being burnt accidentally.
4.The floating boat produced by our company is made of good engineering plastic. It has great buoyancy and high strength.
5.The impeller is made of nice plastic. The spoke and vane is shaped with plastic only one time.
6.The flexible gearing is fixed by the stainless wheel bolt.
7.Oxygenation rate:2.5kg/h.
8.Outer packing:carton.
9.Easy maintenance.
10.Stainless steel frame is sturdy,without deformation and high durability.
11.Can be used both on freshwater and seawater.
High oxygenation performance :
1, High quality motor expertise design for aquaculture industry
2, Low friction gear reducer with low resistance to decrease energy losses
3, Sturdy stainless steel Frame ensure without any deformation and high
durability
4, High performance impeller, replaceable paddle,low maintain cost
5, HDPE float resist impact, acid-alkalinity and sun exposure, one piece blow molde.
Parameter:
Impeller type aerator
Model |
Motor |
Voltage |
Power efficiency |
Oxygen transfer rate |
Active area |
SLYL-1.5 |
1.5KW |
220V/380V |
≥1.4kg/kw.h |
2.25kg(O2)/h |
4-8mu |
SLYL-2.2 |
2.2kw |
380V |
≥1.4kg/kw.h |
3.37kg(O2)/h |
5-10mu |
SLYL-3 |
3KW |
380V |
≥1.4kg/kw.h |
4.5kg(O2)/h |
7-12mu |
Paddle wheel type aerator
Model |
Power |
Horsepower |
Voltage |
Aerobic capacity (kg/h ) |
SL-Z-2 |
0.75 kw |
1HP |
220 V |
≥1.1 |
SL-Z-4 |
1.5 kw |
2HP |
380 v |
≥ 2.3 |
SL-Z-6 |
2.2 kw |
3 HP |
380 v |
≥ 3.4 |
As a kind of typical gas pressurization and conveying machinery, aeration roots blower in the specific pressure area has wide applicable characteristics. Paddle wheel Aerator with 2 impellers/micro bubble aerated lagoons aerator/roots blower The traffic is usually 0.5 ~ 800 m3 / min, up to about 1400 m3 / min, single stage work pressure of 53.3 ~ 98 kpa, two-stage series,aeration roots blower which can realize - 80 ~ 200 kpa.
JHGJHVHGV
In terms of application, most of Paddle wheel Aerator with 2 impellers/micro bubble aerated lagoons aerator/roots blower for the use of air blower. Their use in building materials, aeration roots blower electric power, metallurgy, chemical and petrochemical, mining, ports, textile, pharmaceutical, paper making, aquaculture and so on many fields. Using air tightness good sealing device, Paddle wheel Aerator with 2 impellers/micro bubble aerated lagoons aerator/roots blower also can be used to transport air outside of the gas, such as hydrogen, industrial oxygen, carbon monoxide, carbon dioxide, hydrogen sulphide, methane and acetylene, coal, etc.
KHJHVJDGAD